Take home security to the next level and scare off any would-be criminal with this Voice Alert Alarm Kit. The Voice Alert can have up to 6 programmable zones (unlimited sensors per zone), that paired with the 105 DB alarm will keep you and your family safe. The motion sensors connect wirelessly to the base station and can be up to 1000 feet away (Clear line of Sight) and are battery operated. Knowing that there is someone on your property is just the first step, the second step is knowing where they are; now with the Voice Alert you do. Each zone will play a custom recorded message by you when there is motion in that area. This system is used in both homes and businesses.

Voice Alert System-6 Receiver/Speaker

• Records six separate voice messages (6 seconds each)
• Supports an unlimited number of Sensor Transmitters
• Speaker volume control
• Audio Line Output Connection
• Voice message (user initiated): One button for each zone
• Voice message (transmitter initiated): Programmed to desired message (user programmable)
• Individual "C" relays enable other devices to be triggered
• Missed message indicator: Flashing LED
• Missed message playback: Push button
• Receiver type: Super Heterodyne
• Frequency of receiver: 433.92 MHz
• Method of recording: Digital, solid state, user-recordable
• FCC Part 15 Approved
• Receiver Stability: Crystal
• Receiver Sensitivity: 100dBm
• Low Battery LED indicates sensor w/low battery
• Low Battery voice message identifies specific zone
• AC/DC Power Adapter - 6Õ cord length
• Power Requirement: 117V AC - 60Hz
• Power Input: 9VDC - 1 AMP
• Installation: Wall or tabletop
• Receiver/Speaker Dimensions: 8.50" W x 1.75" H x 5.75" D

Wireless PIR Sensor/Transmitter

• Monitored range: 40' x 40' feet
• Adjustable (rotating, pivoting) sensor mounting
• Indoor/outdoor all-weather construction
• Adjustable delay timer (0-3 minutes)
• Enable/Disable PIR Switch
• Built-in Contact Closure Connection
• Battery operated - 9V battery included
• Method of intrusion detection: Pyroelectric Infrared Detector (Heat)
• Adjustable Beams: Default: Fan Beam approximately 40' x 40' (mounted 7.5') Options: Vertical Beam, Horizontal Beam
• Frequency of RF transmitter: 433.92 MHz
• Output Power: FCC Part 15 Approved
• Transmission distance: up to 1000' in open space (300 feet through walls)
• Transmitter modulation: OOK (On Off Keying)
• Code programming: User programmable 256 codes
• Power management: Battery saver settings
• Sensor/Transmitter Dimensions: 2.38" W x 5.00" H x 5.00" D
• Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Write a review