Dakota Alert Rubber Hose Kit
The Dakota Alert Rubber Hose Kit is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the WR-3000 receiver up to 600 feet away*.
The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.
The receiver plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
The receiver is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.
Note: Actual range will vary depending on the local terrain.
Features:
- 600FT radio range
- Weatherized transmitter
- Capable of handling up to 4 transmitters
- 4 Separate audio chimes for easy identification of zone alerts
- Operating Range: -30°F to 120°F
- Easy set up
Includes:
- Dakota Alert Rubber Hose Alert Kit
- Manual
- 1 Year Warranty
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:


















































































-182x182.jpg)








