The Dakota Alert Rubber Hose Kit is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the receiver up to 1/2 miles away*.

The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.

The receiver plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.

The Dakota Alert Rubber Hose Kit is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and relays can be set to activate for 1 second, 10 seconds, 60 seconds or 10 minutes, if this is desired. The tones will still sound for several seconds.

Note:  Actual range may vary depending on the local terrain.

Features:

• 1/2 Mile radio range
• Weatherized transmitter
• Capable of handling up to 4 transmitters
• 4 Separate audio chimes for easy identification of zone alerts
• Operating Range: -30°F to 120°F
• Easy set up

Includes:

• Dakota Alert Rubber Hose Kit 2500 Series
• Manual
• 1 Year Warranty

Write a review